How to Change out Your Car’s Starter

Changing your car’s starter is a relatively simple task that can be done by most car owners with some basic mechanical knowledge and the right tools. The starter is an important component of your vehicle’s electrical system, and it is responsible for turning over the engine when you turn the key in the ignition. A failing starter can cause your engine to crank slowly or not at all, making it difficult to start your car. Here is a step-by-step guide on how to change your car’s starter:

1. Locate the starter: The starter is typically located on the lower part of the engine, near the transmission. It is usually a cylindrical shape component with two wires attached to it.
2. Disconnect the battery: Before you begin the process, it’s important to disconnect the battery to prevent any electrical shock or damage to your car’s electrical system.
3. Remove the starter’s electrical connections: The starter has two electrical connections, one positive and one negative. You will need to remove these connections before you can remove the starter.
4. Remove any mounting bolts: The starter is typically held in place by a few mounting bolts. Using a socket wrench or pliers, remove these bolts and set them aside.
5. Remove the starter: Once the bolts have been removed, you should be able to pull the starter out of the engine. Be careful not to drop it, as it can be heavy.
6. Install the new starter: Place the new starter in the same position as the old one and secure it with the mounting bolts. Make sure that the starter is securely in place before you reconnect the electrical connections.
7. Reconnect the battery: Once the starter is securely in place, you can reconnect the battery and start your car to test if the new starter is working properly.

In summary, changing your car’s starter is a relatively simple task that can be done by most car owners with some basic mechanical knowledge and the right tools. The starter is an important component of your vehicle’s electrical system, and it is responsible for turning over the engine when you turn the key in the ignition. The process includes locating the starter, disconnecting the battery, removing the starter’s electrical connections, removing the mounting bolts, installing the new starter and reconnecting the battery. However, if you are not comfortable with the process, it’s always best to consult a professional mechanic.